Jurris.COM
Section 19990 Of Chapter 4. Application And Scope From California Health And Safety Code >> Division 13. >> Part 6. >> Chapter 4.
19990
. (a) Except as provided in Section 18930, the department
shall adopt rules and regulations to interpret and make specific this
part. The department shall adopt and submit building standards for
approval pursuant to Chapter 4 (commencing with Section 18935) of
Part 2.5 of this division for the purposes described in this section.
Standards adopted, amended, or repealed from time to time by the
department pursuant to this chapter shall include provisions imposing
requirements reasonably consistent with recognized and accepted
standards contained in the most recent editions of the following
uniform industry codes as adopted or amended from time to time by the
organizations specified:
(1) The Uniform Housing Code of the International Conference of Building Officials.
(2) The Uniform Building Code of the International Conference of Building Officials.
(3) The Uniform Plumbing Code of the International Association of Plumbing and Mechanical Officials.
(4) The Uniform Mechanical Code of the International Conference of Building Officials and the International Association of Plumbing and Mechanical Officials.
(5) The National Electrical Code of the National Fire Protection Association.
(b) The department shall require every city and county to file with the department all wind pressure and snow load requirements in effect within their respective jurisdictions if these requirements differ from building standards published in the State Building Standards Code, on or before January 1 of each year. The department shall notify every manufacturer of factory-built housing of these requirements on or before March 1 of each year.
(c) Except as provided in Section 18930, the department shall adopt other rules and regulations as it deems necessary to carry out this part. In promulgating these other rules and regulations the department shall consider any amendments to the uniform codes referred to in this section. In the event of any conflict with respect to factory-built housing between Part 1.5 (commencing with Section 17910) and this part, the requirements of this part shall control.
(1) The Uniform Housing Code of the International Conference of Building Officials.
(2) The Uniform Building Code of the International Conference of Building Officials.
(3) The Uniform Plumbing Code of the International Association of Plumbing and Mechanical Officials.
(4) The Uniform Mechanical Code of the International Conference of Building Officials and the International Association of Plumbing and Mechanical Officials.
(5) The National Electrical Code of the National Fire Protection Association.
(b) The department shall require every city and county to file with the department all wind pressure and snow load requirements in effect within their respective jurisdictions if these requirements differ from building standards published in the State Building Standards Code, on or before January 1 of each year. The department shall notify every manufacturer of factory-built housing of these requirements on or before March 1 of each year.
(c) Except as provided in Section 18930, the department shall adopt other rules and regulations as it deems necessary to carry out this part. In promulgating these other rules and regulations the department shall consider any amendments to the uniform codes referred to in this section. In the event of any conflict with respect to factory-built housing between Part 1.5 (commencing with Section 17910) and this part, the requirements of this part shall control.
