Section 25250.55 Of Article 13.5. Motor Vehicle Brake Friction Materials From California Health And Safety Code >> Division 20. >> Chapter 6.5. >> Article 13.5.
25250.55
. Brake friction materials for the following motor vehicle
classes are exempt from this article:
(a) Military tactical support vehicles.
(b) Vehicles employing internal closed oil immersed brakes, or a
similar brake system that is fully contained and emits no copper,
other debris, or fluids under normal operating conditions.
(c) Brakes designed for the primary purpose of holding the vehicle
stationary and not designed to be used while the vehicle is in
motion.
(d) Motorcycles.
(e) Motor vehicles subject to voluntary or mandatory recalls of
brake friction materials or systems due to safety concerns. This
exemption shall expire upon the lifting of the recall and provision
of new brake friction materials that comply with this article.
(f) Motor vehicles manufactured by small volume manufacturers, as
defined in Section 1900 of Title 13 of the California Code of
Regulations.
(g) Vehicles manufactured prior to January 1, 2021, and brake
friction materials for use on vehicles manufactured prior to January
1, 2021, from the requirements of Section 25250.52.
(h) Vehicles manufactured prior to January 1, 2025, and brake
friction materials for use on vehicles manufactured prior to January
1, 2025, from the requirements of Section 25250.53.
(i) Vehicles for which an extension from the requirements of
Section 25250.53 was approved pursuant to Section 25250.54.