Jurris.COM
Section 26104 Of Article 1. General Provisions From California Health And Safety Code >> Division 20. >> Chapter 18. >> Article 1.
26104
. (a) (1) The department shall, at the time it commences
preparation of the permissible exposure limits to mold, provide
notice electronically by posting on its Internet Web site a notice
that informs interested persons that the department has initiated
work on the permissible exposure limits to mold.
(2) The notice shall also include a brief description or a bibliography of the technical documents or other information the department has identified to date as relevant to the preparation of the permissible exposure limits.
(3) The notice shall inform persons who wish to submit information concerning exposure to molds of the name and address of the person in the department to whom the information may be sent, the date by which the information must be received in order for the department to consider it in the preparation of the permissible exposure limits, and that all information submitted will be made available to any member of the public who makes the request.
(b) The department may amend the permissible exposure limits to molds to make the limits less stringent if the department shows clear and convincing evidence that the permissible exposure limits to molds should be made less stringent and the amendment is made consistent with Section 26103.
(c) The department may review, and consider adopting by reference, any information prepared by, or on behalf of the United States Environmental Protection Agency or other authoritative bodies, for the purpose of adopting national permissible exposure limits to molds.
(d) At least once every five years, after adoption of permissible exposure limits to molds, the department shall review the adopted limits and shall, consistent with the criteria set forth in subdivisions (a) and (b) of Section 26103, amend the permissible exposure limits if any of the following occur:
(1) Changes in technology or treatment techniques that permit a materially greater protection of public health.
(2) New scientific evidence that indicates that molds may present a materially different risk to public health than was previously determined.
(2) The notice shall also include a brief description or a bibliography of the technical documents or other information the department has identified to date as relevant to the preparation of the permissible exposure limits.
(3) The notice shall inform persons who wish to submit information concerning exposure to molds of the name and address of the person in the department to whom the information may be sent, the date by which the information must be received in order for the department to consider it in the preparation of the permissible exposure limits, and that all information submitted will be made available to any member of the public who makes the request.
(b) The department may amend the permissible exposure limits to molds to make the limits less stringent if the department shows clear and convincing evidence that the permissible exposure limits to molds should be made less stringent and the amendment is made consistent with Section 26103.
(c) The department may review, and consider adopting by reference, any information prepared by, or on behalf of the United States Environmental Protection Agency or other authoritative bodies, for the purpose of adopting national permissible exposure limits to molds.
(d) At least once every five years, after adoption of permissible exposure limits to molds, the department shall review the adopted limits and shall, consistent with the criteria set forth in subdivisions (a) and (b) of Section 26103, amend the permissible exposure limits if any of the following occur:
(1) Changes in technology or treatment techniques that permit a materially greater protection of public health.
(2) New scientific evidence that indicates that molds may present a materially different risk to public health than was previously determined.
