Jurris.COM
Section 42314 Of Article 1. Permits From California Health And Safety Code >> Division 26. >> Part 4. >> Chapter 4. >> Article 1.
42314
. (a) Notwithstanding any other provision of any district
permit system, and except as provided in this section, no district
shall require emissions offsets for any cogeneration technology
project or resource recovery project that satisfies all of the
following requirements:
(1) The project satisfies one of the following size criteria:
(A) The project produces 50 megawatts or less of electricity. In the case of a combined cycle project, the electrical capacity of the steam turbine may be excluded from the total electrical capacity of the project for purposes of this paragraph if no supplemental firing is used for the steam portion and the combustion turbine has a minimum efficiency of 25 percent.
(B) The project processes municipal wastes and produces more than 50 megawatts, but less than 80 megawatts, of electricity.
(2) The project will use the appropriate degree of pollution control technology (BACT or LAER) as defined and to the extent required by the district permit system.
(3) Existing permits for any item of equipment to be replaced by the project, whether the equipment is owned by the applicant or a thermal beneficiary of the project, are surrendered to the district or modified to prohibit operation simultaneously with the project to the extent necessary to satisfy district offset requirements. The emissions reductions associated with the shutdown of existing equipment shall be credited to the project as emissions offsets in accordance with district rules.
(4) The applicant has provided offsets to the extent they are reasonably available from facilities it owns or operates in the air basin and that mitigate the remaining impacts of the project.
(5) For new projects that burn municipal waste, landfill gas, or digester gas, the applicant has, in the judgment of the district, made a good faith effort to secure all reasonably available emissions offsets to mitigate the remaining impact of the project, and has secured all reasonably available offsets.
(b) This section applies to any project for which an application for an authority to construct is deemed complete by the district after January 1, 1986, only if the project's net emissions, combined with the net emissions from projects previously permitted under this section, are less than the amount provided for in the applicable growth allowance established by the district pursuant to Section 41600. If a district has not yet provided a growth allowance pursuant to Section 41600, the growth allowance is zero. For purposes of this subdivision, "net emissions" means the project's emissions, less any offsets provided by the applicant and less utility displacement credits granted pursuant to Section 41605.
(c) This section does not relieve a project from satisfying all applicable requirements of Part C (Prevention of Significant Deterioration) of the Clean Air Act, as amended in 1977 (42 U.S.C. Sec. 7401 et seq.), or any rules or regulations adopted pursuant to Part C.
(1) The project satisfies one of the following size criteria:
(A) The project produces 50 megawatts or less of electricity. In the case of a combined cycle project, the electrical capacity of the steam turbine may be excluded from the total electrical capacity of the project for purposes of this paragraph if no supplemental firing is used for the steam portion and the combustion turbine has a minimum efficiency of 25 percent.
(B) The project processes municipal wastes and produces more than 50 megawatts, but less than 80 megawatts, of electricity.
(2) The project will use the appropriate degree of pollution control technology (BACT or LAER) as defined and to the extent required by the district permit system.
(3) Existing permits for any item of equipment to be replaced by the project, whether the equipment is owned by the applicant or a thermal beneficiary of the project, are surrendered to the district or modified to prohibit operation simultaneously with the project to the extent necessary to satisfy district offset requirements. The emissions reductions associated with the shutdown of existing equipment shall be credited to the project as emissions offsets in accordance with district rules.
(4) The applicant has provided offsets to the extent they are reasonably available from facilities it owns or operates in the air basin and that mitigate the remaining impacts of the project.
(5) For new projects that burn municipal waste, landfill gas, or digester gas, the applicant has, in the judgment of the district, made a good faith effort to secure all reasonably available emissions offsets to mitigate the remaining impact of the project, and has secured all reasonably available offsets.
(b) This section applies to any project for which an application for an authority to construct is deemed complete by the district after January 1, 1986, only if the project's net emissions, combined with the net emissions from projects previously permitted under this section, are less than the amount provided for in the applicable growth allowance established by the district pursuant to Section 41600. If a district has not yet provided a growth allowance pursuant to Section 41600, the growth allowance is zero. For purposes of this subdivision, "net emissions" means the project's emissions, less any offsets provided by the applicant and less utility displacement credits granted pursuant to Section 41605.
(c) This section does not relieve a project from satisfying all applicable requirements of Part C (Prevention of Significant Deterioration) of the Clean Air Act, as amended in 1977 (42 U.S.C. Sec. 7401 et seq.), or any rules or regulations adopted pursuant to Part C.
