Jurris.COM
Section 16700 Of Division 2. Definitions From California Penal Code >> Division 2. >> Title 1. >> Part 6.
16700
. (a) As used in this part, "imitation firearm" means any BB
device, toy gun, replica of a firearm, or other device that is so
substantially similar in coloration and overall appearance to an
existing firearm as to lead a reasonable person to perceive that the
device is a firearm.
(b) As used in Section 20165, "imitation firearm" does not include any of the following:
(1) A nonfiring collector's replica that is historically significant, and is offered for sale in conjunction with a wall plaque or presentation case.
(2) A spot marker gun which expels a projectile that is greater than 10mm caliber.
(3) A BB device that expels a projectile, such as a BB or pellet, that is other than 6mm or 8mm caliber.
(4) A BB device that is an airsoft gun that expels a projectile, such as a BB or pellet, that is 6mm or 8mm caliber which meets the following:
(A) If the airsoft gun is configured as a handgun, in addition to the blaze orange ring on the barrel required by federal law, the airsoft gun has a trigger guard that has fluorescent coloration over the entire guard, and there is a two centimeter wide adhesive band around the circumference of the protruding pistol grip that has fluorescent coloration.
(B) If the airsoft gun is configured as a rifle or long gun, in addition to the blaze orange ring on the barrel required by federal law, the airsoft gun has a trigger guard that has fluorescent coloration over the entire guard, and there is a two centimeter wide adhesive band with fluorescent coloring around the circumference of any two of the following:
(i) The protruding pistol grip.
(ii) The buttstock.
(iii) A protruding ammunition magazine or clip.
(5) A device where the entire exterior surface of the device is white, bright red, bright orange, bright yellow, bright green, bright blue, bright pink, or bright purple, either singly or as the predominant color in combination with other colors in any pattern, or where the entire device is constructed of transparent or translucent materials which permits unmistakable observation of the device's complete contents.
(c) The adhesive bands described in paragraph (4) of subdivision (b) shall be applied in a manner not intended for removal, and shall be in place on the airsoft gun prior to sale to a customer.
(d) This section shall be operative on January 1, 2016.
(b) As used in Section 20165, "imitation firearm" does not include any of the following:
(1) A nonfiring collector's replica that is historically significant, and is offered for sale in conjunction with a wall plaque or presentation case.
(2) A spot marker gun which expels a projectile that is greater than 10mm caliber.
(3) A BB device that expels a projectile, such as a BB or pellet, that is other than 6mm or 8mm caliber.
(4) A BB device that is an airsoft gun that expels a projectile, such as a BB or pellet, that is 6mm or 8mm caliber which meets the following:
(A) If the airsoft gun is configured as a handgun, in addition to the blaze orange ring on the barrel required by federal law, the airsoft gun has a trigger guard that has fluorescent coloration over the entire guard, and there is a two centimeter wide adhesive band around the circumference of the protruding pistol grip that has fluorescent coloration.
(B) If the airsoft gun is configured as a rifle or long gun, in addition to the blaze orange ring on the barrel required by federal law, the airsoft gun has a trigger guard that has fluorescent coloration over the entire guard, and there is a two centimeter wide adhesive band with fluorescent coloring around the circumference of any two of the following:
(i) The protruding pistol grip.
(ii) The buttstock.
(iii) A protruding ammunition magazine or clip.
(5) A device where the entire exterior surface of the device is white, bright red, bright orange, bright yellow, bright green, bright blue, bright pink, or bright purple, either singly or as the predominant color in combination with other colors in any pattern, or where the entire device is constructed of transparent or translucent materials which permits unmistakable observation of the device's complete contents.
(c) The adhesive bands described in paragraph (4) of subdivision (b) shall be applied in a manner not intended for removal, and shall be in place on the airsoft gun prior to sale to a customer.
(d) This section shall be operative on January 1, 2016.
